Simple Maintenance
Each Geareducer is equipped with
a stainless steel lubrication line
terminating outside the fan cylinder,
near the motor, at an oil level sight
glass and drain. Low profile allows
for easier access to equipment.
Durable Marley Geareducer
®
—the industry quality standard.
Designed to meet or exceed the
requirements of CTI STD-111
and AGMA STD 420.4, and run-
in under load prior to shipment.
5-year warranty assures trouble-free
operation.
Internal Piping Arrangement
enhances tower appearance and
allows balanced distribution and
flow.
Corrosion Resistant
pultruded fiberglass structural
components and fan deck panels,
FRP endwall casing and stainless
steel hot water basins are all
impervious to a broad range of
corrosive materials.
High-Performance Film Fill
Marley MX film fill removes process
heat efficiently, predictably. Integrally
molded drift eliminators and louvers
virtually eliminate drift spotting
nuisance and help operation even in
extremely cold weather.
Non-skid Fan Deck
of interlocking pultruded panels, with
fasteners concealed by the adjacent
panel, offers a clean surface free of
trip hazards.
Marley Spiral Target Nozzles
Injection molded polypropylene with
a diffuser and snap-in orifice cap
offer a wide range of adjustment in
flow rates and basin water levels;
even distribution over the fill area.
SP-SF-C
/
Marley Sigma F Series
Cooling Tower /
7401 WEST 129 STREET
|
OVERLAND PARK, KANSAS 66213 UNITED STATES
|
913 664 7400
|
spxcooling@spx.com
|
spxcooling.com
In the interest of technological progress, all products are subject to design and/or material change without notice.
©2008 SPX Cooling Technologies, Inc. | Printed in USA
