background image

FAQ:

Q: Can’t start recording – LED flashes only once and the card is not full.
A: The card contains 255 records. For next recording you must delete at least last record from 
the list or format the card.
 
Q: Card can’t be initialized, LED always flashes 5 times.
A: Card is not micro SDHC type or is  not properly inserted or the power supply can’t give 
sufficient current to initialize the card.

Q: The beginning time of recording is incorrect.
A: This  time  is  always  equivalent  to the real time clock, which  are synchronized  from the 
card. This problem should happen, when the batteries were removed or the card was removed 
and clocks are resynchronized again with wrong time.

Q: Recorder was operating and the power source has been suddenly interrupted.
A: For this case the last record will be stored properly without any problems.

Q: The image  file  is  missing  on the card, or the card is  unreadable  in  PC computer or the 
image file was deleted.
A: In this case never try to recover the date by using any data recovery software and consult 
this problem with your distributor of recorder. All the data should be recovered, but recorder 
is using specific way to store the data and special procedure must be used for this case.
 

Summary of Contents for LR32BOX









Reviews: