Read Before Using
Operating Instructions
Changing the Spinner Blade
1.
Simply remove the special “spring pin” from the spinner shaft that
holds the regular spinner blade onto the spinner shaft. Lift the stain-
less collar that holds the shaft together.
2.
Slide the shaft upwards a few inches and remove the blade from the
shaft.
3.
Slide the Mulch Basket onto the shaft, slide the collar back onto the
shaft under the blade, re-connect the shaft and slide the collar over
the break in the shaft.
4.
Put the “spring pin” in the lower hole on the shaft (for the Mulch
Basket) and clip the spring onto the shaft using the hook. The
“spring pin” holds the spinner blade in place and stops the collar
from moving upwards so that the shaft will not separate.
5.
Reverse instructions for replacing the regular spinner blade. The
only difference would be that you must pin the regular blade using
the upper hole on the spinner shaft. It’s easy. The upper hole is for
the regular spinner blade, the lower hole is for the Mulch Basket.
27
LIMITED WARRANTY
This is warranted to the original purchaser only, other than used commercially,
against defects in materials and workmanship, for a period of ninety (90) days
from the date of purchase.
Spyker Spreaders LLC, will not be liable for any loss, damage or expense includ-
ing, but not limited, consequential or incidental damages, arising from the oper-
ation, condition or use of the item, the sole and exclusive remedy against Spyker
Spreaders LLC, being the replacement of the defective parts. This warranty
gives you specific legal rights and you may also have other rights which vary from
state to state.
THIS EXPRESS WARRANTY, WHICH IS APPLICABLE ONLY TO THE
ORIGINAL PURCHASER, IS IN LIEU OF AND EXCLUDES ALL OTHER
WARRANTIES, WHETHER EXPRESSED OR IMPLIED BY OPERATION
OF LAW OR OTHERWISE, INCLUDING ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.
Spyker Spreaders LLC
810 West Main St.
N. Manchester, IN 46962.
U.S.A.
