English Manual
Page 11
1019548-A
The ideal spreader FAN height is 22" off the ground.
To find where the spreader mount (2) needs to be located, follow Steps 8, 9, and 10.
Assembly
8.
Measuring the Hitch Height
SPYKER
Measure from the ground to the bottom of the
spreader mount (
3
), as illustrated below.
3
B
3
2
LESCO
Measure from the ground to the top of the center
tubing of the spreader mount (
3
), as illustrated
below.
B
3
3
2
IF THIS
MEASUREMENT
IS MORE THAN
15 INCHES
The Spreader
Mount (
3
)
will need to be
moved down.
Each hole in the Adjustment Plate (
2
) will allow for 1"
of drop. Move the Spreader Mount (
3
) down until
dimension "B" is 15" off the ground.
NOTE
: In the Spyker configuration, the Spreader
Mount (3) can be inverted 180 degrees to allow for
more movement down
