Page 9
English Manual
1019622-C
Assembly
1. Utilizing the holes illustrated here, align the
boom arms to the center section. Attach using
the 3/8” hinge bolts and locknuts (
28
).
NOTE:
Do not tighten fully! Allow movement.
2. With the boom arms folded closed, install the
springs (
23
) on the spring mounting tabs.
3.
Add the boom to the
front of the spreader.
Rest the opened boom assembly on
the extended front tubular frame of
the spreader, as illustrated.
NOTE:
Center the vertical
mounting brackets (
A
).
Bolt the boom to the spreader
frame using hardware from the
provided U-bolt bag (
31
).
NOTE:
When viewed
from above, be mindful that
the U-bolt must pass through
the opening of the vertical
mounting brackets (
A
).
View From
Above
Fig. 1
28
Fig. 2
23
31
31
A
31
A
