Spypoint Pro-X, User Manual

30

31

SOUND RECORDING

The  SPYPOINT  PRO-X  offers  the  possibility  to  record 

the  sound  in VIDEO  mode. As  soon  as  the VIDEO  mode  is 

selected, the camera will automatically record the sound. Under 

the camera, you will find a rubber cap with the inscription 

MIC. If the user doesn’t want to record the sound, the rubber 

cap needs to stay on (figure 1). If the recording of the sound is 

necessary, the user has to lift the rubber cap and to slightly turn 

it so the microphone receiver is completely cleared (figure 2).

DOWNLOAD TO A COMPUTER

To transfer or view photos and videos on a PC, you must first 

turn the camera off and use the USB cable (supplied) to connect 

the camera to your computer. The computer will then recognize 

the camera as a removable disk drive. Camera operator must 

wait until the termination of computer software installation 

(few seconds) before clicking on Desktop. Then, click on 

removable disk and look to find folder with DCIM. Click on 

the DCIM folder and all the photos and videos will be found in 

100DSCIM folder. Photos and videos can be viewed, edited or 

deleted with your computer’s software. 

Taking the SD card out of the camera and inserting it in the 

computer port will achieve same results. If no SD slot is built 

into the computer, a multi-card reader RD25-1 (sold separately) 

must be used.

English

TROUBLESHOOTING

No person / animal on photos

1. 

Rising sun can trigger sensor. Camera must be reoriented.

2.  At night, motion detector may detect beyond range of the 

IR Illumination. Reduce distance setting.

3. 

Small  animal  may  be  triggering  unit.  Reduce  distance 

setting and/or raise height of camera.

4.  Motion detector may sense animals through foliage.

5.  If person/animal moves quickly, it may move out of 

camera field of view before photo is taken. Move camera 

further back or redirect camera. 

6.  Camera must be set on a stable and immovable object  i.e. 

large tree.

Red light blinking

1.  Main mode switch is in test mode.

2. 

Main mode switch is in Photo or Video mode.  Red light 

blinks during 60 sec. allowing the operator to walk away 

from camera.

English