In the Box
Glasses with built-in camera
USB cable
Carrying case
Cleaning cloth
User manual
Precautions
Don’t leave the glasses in a hot environment such as on the dashboard of a vehicle
parked under a blazing sun.
Don’t immerse the glasses in liquid or expose them to rain or snow. The camera
electronics are not waterproof.
Don’t toss the glasses into a fire since the battery could explode.
Don’t aim a bright light into the lens or point the camera at the sun since either could
damage the sensor.
Don’t operate the device in dusty, sandy or dirty places since the camera’s
components could be damaged. If you want to chance taking the camera into less
than ideal conditions, first cover the USB port with black electrical tape.
This product should not be used in illegal ways. Observe relevant laws.
CLEAR HD VIDEO GLASSES USER GUIDE
2
Getting Started
Charge the internal battery by attaching the included USB cable to the port on
the underside of the frame and tethering it to a USB adapter (not included) that
plugs into an electrical outlet. You can also charge the device from a USB port on
a computer. During charging a tiny yellow LED on the inside of the frame will blink
when battery power is low and blue when fully charged. Figure about an hour to
charge the camera the first time.
If you turn on the glasses when battery power is low, the indicator will blink yellow
and blue, then shut down. This is your cue to recharge the glasses before trying to
use them.
