Spytec G1W-H, User Manual

Record Audio

There are settings to enable or disable audio recording available from the menu by 

selecting the Record Audio option and navigating using the Up and Down buttons to 

choose either On or Off. In Off mode, only video is recorded and in On mode, both 

audio and video are recorded. Once the On or Off option is highlighted, press the 

Capture button to save the selection.

G-Sensor

The G-Sensor stabilizes the image in the event that a wreck or other physical 

disturbance occurs. The G-Sensor prevents any recorded footage during a physical 

disturbance from being lost by not allowing Loop mode to have effect, thus not 

allowing the device to record over the footage by proceeding with regular, continual 

recording.  To access G-Sensor settings, select G-Sensor from the Menu and use the 

Up and Down buttons to navigate settings: On, Off, High, Medium or Low. The High 

settings will detect slight physical disturbance whereas Low will detect only major 

physical disturbance. Press the Capture button.

Date Stamp 

The date stamp may be enabled or disabled by selecting Date Stamp from the 

menu. Select either On or Off and press the Capture button to save changes.

Set the Time and Date

To set the time and date, use the Up and Down buttons to select the System Setup 

icon (last on the right) of the settings menu and press the Capture button. Here 

Time and Date are listed with an arrow pointing to changeable values. Use the Up 

and Down buttons to adjust the values. After you have found the correct value for 

the year, press the Capture button. Now, you can adjust the Date Format by 

pressing the Up and Down buttons. Press the Capture button after selecting the 

desired format. 

Auto Power Off 

By selecting Auto Power Off in the menu, the camera is able to set off automatically 

after 3 Minutes, 5 Minutes or 10 Minutes. This may be disabled by selecting Off in 

the menu. After highlighting the selection, press the Capture button to update 

settings.

Beep Sound

By selecting Beep Sound in the menu, the beep sound may be disabled or enabled 

by selecting either On or Off and pressing the Capture button to save settings.

Spy Tec

www.spytecinc.com

Spy Tec

www.spytecinc.com

9

Video Settings Menu