STEP 3 – Create an Account and Login
a. You can activate your tracker here: www.spytecinc.com/gps-activation
b. Your login details will be emailed to you.
c. Once you log into your account, you will see the mapping platform where your GX350
will show its location.
SPYTEC GPS GX350 PORTABLE TRACKER USER GUIDE
3
Important Facts
Standard programming for the GX350 is to update every 3 hours when not moving
and once a minute when moving.
When ON, the Green LED will flash once every 10 seconds.
The Blue Satellite LED is quite random and can generally be ignored.
When powering off, the Red LED will remain on for up to 2 minutes, then power down.
The optional M2 Waterproof Magnetic Case for the GX350 makes placement easy. Buy
it at: www.spytecinc.com/waterproof-magnetic-case-for-gl200-gl300.html
STEP 4 – Placement of the Tracker
a. The GX350 needs to have as much access to the open sky as possible to retain a
connection to the GPS satellites.
b. Tracker cannot have metal on most sides. Metal blocks GPS signals.
c. When placing the GX350 under a vehicle, position it as close to the edge as possible,
facing down toward the pavement.
d. DO NOT place the GX350 in the middle of the undercarriage, in the wheel well, inside a
metal bumper, in the trunk or in the engine