background image

SQ PC 5673 / 5674 / 5675 21-05-18 | SQ Professional Ltd © 2018 All rights  reserved.

Meat Grinder

 Operation Manual

 

6

Tips for using your meat grinder 

When your meat grinder is operated for the first time, there may be a slight smell of burning. This 

represents no danger to the user and does not indicate a defect in your meat grinder. The odour 

will soon disappear. 

1  

Raw meat and fish will preserve more juices 

if thoroughly chilled before grinding. When 

grinding larger quantities, fats from meats 

can build up inside the cutter housing, 

decreasing  your  grinder’s  efficiency.  If  this 

occurs, simply disassemble, wash parts in 

hot soapy water and reassemble.

 2 

Make sure the food is free of bone, tough 

tendons, nut shells, etc. before grinding.

 3 

You can season meat while grinding 

(sprinkle onto meat chunks), after grinding 

(mix into the meat), or while cooking. When 

grinding meat for making into sausages, 

it is best to add the seasoning to the 

meat before you grind it, to ensure it is 

thoroughly mixed through the meat.

 4 

Handle meat lightly to prevent it compacting. 

Good quality beef only needs light shaping. 

Beef patties should not be flattened in the 

pan, as this forces desirable juices out of the 

meat.

 5 

When cooking extra-lean meat, a little fat or 

liquid (such as suet, eggs or evaporated milk) 

will increase the meat flavour and juiciness 

and make it more tender. Proportions: 2 

eggs, 4 tablespoons of evaporated milk or 

ground suet for each 450g of ground meat.

 6 

Refrigerate ground meats immediately and 

cook within 24 hours for better food safety.

 

After grinding meat, clean the feed screw 

prior to washing by grinding a slice of stale 

bread.

  8  

Always wash the grinder thoroughly after 

grinding raw meat, before using your 

grinder again.

 9 

Bread crumbs are best made using dry or 

toasted bread. Make sure all parts of the 

grinder are completely dry.

 10 

You can make many variations of sausages 

- pork, beef, lamb, venison, pheasant, duck, 

fish, seafood and vegetarian.

11 

By making your own sausages at home you 

can ensure that only the best ingredients 

and spices are used, as well as control the 

fat content.

12 

Sausages with a low amount of fat can 

taste dry. Adding fruits such as chopped 

apple or raisins will add some moisture. 

Alternatively, use onions and mushrooms.

 

To stuff the casings, first cut the casings into ap

-

proximately 60cm/122cm (2 or 3 foot) lengths. 

Prick the casing with a pin to allow air to escape 

while stuffing. Gather all of the casing over the 

sausage nozzle except for the last four inches. 

Place the ground and seasoned meat into the 

grinder.

Stuff  the  casing  loosely  as  some  casings  will 

expand during cooking. As the casings begin to 

fill, tie securely at the end. Distribute the meat 

through the casing and twist into links as it fills 

to obtain the desired size and shape.
Fresh sausages should be kept tightly wrapped 

and stored under refrigeration in an airtight 

container for a maximum of 2 days. They should 

always be thoroughly cooked before serving. To 

freeze sausages, wrap them carefully and use 

within 2-3 months.

Summary of Contents for 5673









Reviews: