All images are for illustration purposes only. Actual products may vary.
feaTURes
Twist-N-Blitz Nutrient Extractor Instruction Manual
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1
Read all instructions carefully before using the appliance
2
This appliance is intended for household use only It is not
suitable for commercial use such as staff kitchen areas and
other working environments
3
ensure that the appliance is always placed on a firm and flat
surface, away from the edge of the work top
Do not place
the appliance onto a metal tray or metal surface whilst in use
Do not place the appliance on, or near, a hot gas or electric
burner or in a heated oven Do not operate the appliance with
wet hands or barefoot
4
Keep the appliance and mains cable away from the edges of
work tops and out of reach of children Route the cable so
it does not overhang, and cannot be tripped over or caught
5
Do not let the cable run across an open space, such as
between a low socket and a table, or across any hot area, such
as cooker Heat may damage the mains cable
6
The connections on both sides of the mains cable (the
appliance and socket) should never be strained If the mains
cable is damaged it must be replaced by qualified person or
service to avoid any hazards
7
Do not use the appliance in a bathroom, near
water, or outdoors. Do not immerse any of the
parts (appliance, mains cable, plug) in water or
other liquids to protect against fire, electric shock
and personal injury.
8 Do not use the appliance if it is damaged or
malfunctions. Do not leave the appliance unattended
whilst in use. Use and store it out of reach of children.
9
This appliance must not be operated by an external timer or
a remote control system
10
sQ Professional ltd may not be held liable for eventual damages
to persons, animals or objects caused by incorrect installation or
deriving from improper, erroneous or unreasonable use
11
The blade assembly
3
and motor block
4
should always
be kept dry before washing and drying disconnect the
power supply; ensure that the blade assembly
3
and
motor block
4
are completely dry before you reconnect the
appliance to power supply
12
ensure that the blade assembly
3
is securely in place and a
blending bottle
2
is correctly locked onto the motor block
4
before operating the appliance
13
Do not switch on the appliance when it is empty ensure
there is the at least a minimum amount of liquid or solid
ingredients in the blender
14 Do not attempt to remove the blending bottle
2
from the appliance whilst it is running.
15 Blades are extremely sharp. Handle carefully.
16
switch off the appliance and unplug from the socket before
changing attachments or approaching parts that move while
in use Unplug the appliance when not in use
17
ensure that the appliance has come to a complete stop
before cleaning and storing away Keep the attachments,
motor block
9
, cable, and plug away from sources of heat
store in a dry place
18
Do not use this appliance for any other purpose
than its intended use.
19
Use only the blending bottles
2
with the motor block
4
supplied (and vice versa) and do not tamper with the
connector in any way
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE!
5