background image

ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.

MEGA

PROCESS FOOD PROCESSOR INSTRUCTION MANUAL

WIRING UK PLUGS

Should the mains cable or the power plug become 

damaged, arrange for these to be replaced by 

Customer Service or a qualified person before 

continuing to use the appliance  The appliance is 

fitted with an ASTA approved 5A fuse (BS1362) in a 

5A plug (BS1363)  

THE APPLIANCE MUST NOT BE USED WITHOUT A FUSE COVER FITTED. 

ENVIRONMENTAL PROTECTION

To avoid environmental and 

health problems due to hazardous 

substances in electrical and electronic 

goods, appliances marked with this 

symbol must not be disposed of 

with unsorted municipal waste, but 

recovered, reused or recycled  

5 AMP

SERVICE

The product is not user-serviceable  If it is not 

working, read the instructions, check the plug fuse 

and main fuse/circuit breaker  If it is still not working, 

consult your retailer  
If that does not solve the problem ring Customer 

Service – they may be able to offer technical advice  
Please have the 

Model Number

 to hand, as they will 

not be able to help you without it  
If you are advised to return the product to us, pack 

it carefully, include a note with your name, address, 

day phone number, and description of the problem  
If under a guarantee, say where and when it was 

purchased and include a valid VAT receipt  Send it 

to SQ Professional Ltd  

GUARANTEE

THE GUARANTEE FOR THIS PRODUCT IS COVERED 
BY SQ PROFESSIONAL LIMITED  
ANY FAULTS WITH THIS PRODUCT ARISING 
THROUGH A MANUFACTURER DEFECT WILL 
BE COVERED FOR 1 YEAR FROM THE DATE OF 
PURCHASE, SUBJECT TO A VALID VAT RECEIPT 
BEING PRESENTED  
THIS DOES NOT INCLUDE FAULTS OR DAMAGE 
CAUSED BY MISUSE OF GENERAL WEAR AND TEAR  
PLEASE CONTACT CUSTOMER SERVICES BY 
PHONE ON 

01992 716 070

 OR SEND AN E-MAIL 

TO

 INFO@SQPROFESSIONAL. COM. 

11

Summary of Contents for MEGAPROCESS MEGARANGE













Reviews: