MGIM 9373-9374 21-07-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED.
MEGA
PROCESS FOOD PROCESSOR INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
1
Read all instructions carefully before using the
appliance
2
This appliance is intended for household use only.
It is not suitable for commercial use such as staff
kitchen areas and other working environments.
3
Ensure that the appliance is always placed on a
firm and flat surface, away from the edge of the
worktop
Do not place the appliance onto a metal
tray or metal surface whilst in use. Do not place the
appliance on, or near, a hot gas or electric burner
or in a heated oven. Do not operate the appliance
with wet hands or barefoot.
4
Keep the appliance and mains cable away from
edges of worktops and out of reach of children
Route the mains cable to avoid overhanging, being
caught or tumbling over
5
Do not let the mains cable run across an open
space, such as between a low socket and a table,
or across any hot area, such as a cooker as heat
may damage the mains cable
6
The connections on both sides of the mains
cable (the appliance and socket) should never be
strained If the mains cable is damaged it must be
replaced by a qualified person or service to avoid
any hazards
7
Do not use the appliance in a bathroom, near
water, or outdoors. Do not immerse any of the
parts (appliance, mains cable, plug) in water
or other liquids to protect against fire, electric
shock and personal injury.
8
Do not use the appliance if it is damaged or
is malfunctioning. Do not leave the appliance
unattended whilst in use. Use and store it out of
reach from children.
9
This appliance must not be operated by an
external timer or a remote control system
10
SQ Professional Ltd will not be held liable for
eventual damages to persons, animals or objects
caused by incorrect installation or deriving from
improper, erroneous or unreasonable use
11
The motor unit
top should always be kept dry
Before cleaning and drying, disconnect the power
supply Ensure that the motor unit
is completely
dry before you reconnect the appliance to the
power supply
12
To reduce the risk of injury, ensure that blades
are correctly attached. Always handle the blades
carefully, as they are extremely sharp.
13
Ensure the blending jug
, mixing bowl
, grinding
mill
and any attachments are securely in place
before operating the appliance
14
Always close the blending jug lid
and have the
mixing bowl cover
, citrus juicer
or grinding
mill
securely locked in place before you switch
the appliance on Do not open the blending jug lid
or the mixing bowl cover
and do not try to
remove the citrus juicer
or grinding mill
whilst
the appliance is running
15
Never switch the appliance on when it is empty
Always ensure there is at least the minimum amount
of liquid or solid ingredients in the blending jug
,
mixing bowl
or grinding mill
when operating
this appliance
16
This appliance includes a safety interlocks
which prevent operation unless the accessories are
securely installed.
17
This appliance incorporates a protective device
against high temperatures The appliance will
automatically switch off if the temperature becomes
too high and will resume operation when the motor
has sufficiently cooled down (after about 15 minutes)
18
Do not operate the appliance for more than 1
minute at a time After 1 minute let the appliance
rest for 10 minutes before the next cycle After 5
cycles let the appliance cool down for 90 minutes
This may lengthen the lifespan of the machine
19
Keep hands and utensils out of the blending jug
or mixing bowl
while the appliance is running,
to reduce the risk of severe injury to persons or
damage to the appliance. A spatula may be used
but only when the appliance is not running.
20
Always use the pusher
to push food down
the feeder tube Never use your fingers or other
utensils
4
