ALL IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY.
MEGA
PROCESS FOOD PROCESSOR INSTRUCTION MANUAL
21
Never process hot liquids and ingredients, as
they may be ejected due to a sudden build-up
of steam.
22
Only remove the attachments when the appliance
has come to a complete stop
23
Always switch off the appliance and unplug
the mains cable from the power socket before
changing attachments, or approaching parts that
move while in use
24
Unplug the appliance when not in use
25
Ensure that the appliance has come to a complete
stop before cleaning and storing away Keep the
attachments, motor unit
, cable, and plug away
from sources of heat Store in a dry place
26
Do not use this appliance for any other purpose,
aside from its intended use
27
Use the blending jug
, mixing bowl
, citrus
juicer
,
grinding mill
and the attachments only
with the motor unit
supplied (and vice versa) and
do not tamper with the connector
in any way
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!
BEFORE FIRST USE
BEFORE ATTACHING OR REMOVING ANY PARTS, MAKE SURE THE
MAINS CABLE IS UNPLUGGED FROM THE POWER SOCKET AND
THE ROTARY SWITCH IS IN THE 0 POSITION.
Before first use, wash all the parts that come into
contact with food with warm soapy water and dry
thoroughly (see the section on
cleaning
)
ALWAYS TAKE CARE WHEN HANDLING THE STAINLESS STEEL
BLADES AS THEY ARE VERY SHARP.
OPERATING INSTRUCTIONS
Follow the
important
safeguards
and instructions below
to achieve the best results and to keep your appliance
in good working condition
Do not exceed the recommended maximum
quantities
Do not use this appliance to process ingredients
that are hard (e g frozen meat, inedible food such
as bones and pips), rubbery or sticky (e g candied
orange peel)
FOOD PROCESSING
Always remove the blades before removing the
ingredients from the mixing bowl
This appliance will not operate if the mixing bowl
cover
, citrus juicer
, blending jug lid
or
grinding mill
are not correctly fitted
Do not attempt to remove the blending jug lid
or mixing bowl cover
while the appliance is in
operation
ASSEMBLY OF THE MIXING BOWL
ENSURE THAT THE APPLIANCE IS UNPLUGGED FROM THE POWER
SOCKET, THEN PLACE THE DRIVE SHAFT
ON THE MOTOR UNIT
.
1
Mount the mixing bowl
on the drive shaft
with
the handle on the right-hand side Align the triangle
on the bottom edge of the mixing bowl
with
the open lock symbol on top of the motor unit
2
Turn the mixing bowl
clockwise to lock it in place
The triangle on the bottom edge of the mixing
bowl
should be aligned with the closed lock
symbol on top of the motor unit
to operate
the appliance
3
Install the attachments (see
pages
6 - 9
)
4
Place ingredients into the mixing bowl
Large
pieces of food should be cut into 2cm cubes first
5
Place the mixing bowl cover
onto the mixing
bowl
with the feeder tube on the right-hand side
6
Align the rectangle on top of the mixing bowl
cover
with the open lock symbol on the upper
rim of the mixing bowl
7
Hold the feeder tube with your left hand and the
mixing bowl
handle with your right hand Turn
the mixing bowl cover
clockwise until it clicks into
place This will engage the safety interlocks
in the
handle and ensure the mixing bowl
is securely
attached, so that the appliance is safe to operate
8
Plug the mains cable into the power socket Rotate
the rotary switch
to the desired speed to start
food processing
5