MGIM 9373-9374 21-07-2020 | SQ PROFESSIONAL LTD © 2020 ALL RIGHTS RESERVED.
MEGA
PROCESS FOOD PROCESSOR INSTRUCTION MANUAL
BLENDING
ASSEMBLY OF THE BLENDING JUG
ENSURE THAT THE APPLIANCE IS UNPLUGGED FROM THE POWER
SOCKET THEN REMOVE THE DRIVE SHAFT
FROM THE MOTOR
UNIT
, IF PRESENT. BLADES ARE EXTREMELY SHARP. HANDLE
CAREFULLY.
M
Place the blending jug
(without the blending jug
lid
and measuring cup
) onto the motor unit
with the handle on the right-hand side
N
Align the triangle on the bottom edge of the
blending jug
with the open lock symbol on
top of the motor unit
There is no safety interlock
sensor on the left-hand side of the motor unit
therefore the appliance will not operate if the
blending jug
handle is on the left-hand side
Once the blending jug
has been correctly
aligned, turn its handle in a clockwise direction until
it clicks and locks in place
O
Place ingredients into the blending jug
, then
place the blending jug lid
on top with the
protruding tab covering the blending jug
spout
Firmly push the blending jug lid
onto the rim of
the blending jug
P
Align the protrusions on the sides of the measuring
cup
with grooves in the opening on top of the
blending jug lid
Push the measuring cup
down
and turn clockwise to lock it To add liquids during the
blending process, remove the measuring cup
by
turning it anti-clockwise and slowly pour the liquid
into the blending jug
through the opening in the
blending jug lid
Q
Turn the rotary switch
to the desired speed
setting to start the blending process
DISASSEMBLY OF THE BLENDING JUG
When blending process is finished, turn the rotary
switch
to
0
, ensure the appliance has come to a
complete stop and then unplug the mains cable from
the power socket
Remove the measuring cup
by turning it anti-
clockwise and lifting it from the blending jug lid
Firmly holding the handle of the blending jug
with
one hand, carefully lift and remove the blending jug lid
with the other hand
Turn the blending jug
anti-clockwise to disengage
the safety interlocks
then lift it from the motor unit
and pour the contents out
N
M
O
P
Q
UNLOCKED
LOCKED
USEFUL TIPS
Always stabilise the blending jug
by placing
your hand on top of the blending jug lid
when operating this appliance
To achieve the best results when pureeing solid
ingredients, cut them into small pieces first (2-
3cm) Place small portions into the blending jug
then add gradually
do
not
overload
When mixing solid ingredients, start off with a
small amount of liquid Gradually add more of
the liquid through the opening in the blending
jug lid
For stirring solids or very thick liquid ingredients,
we recommend that you use the blender
in
pulse
mode to prevent the blades from
becoming stuck during use
If blending warm liquids or ingredients, always
ensure that they are cooled down before blending.
Do not fill the glass jug over 1250ml mark.
8
