background image

 

 

 

 

Display not bright

 

 

When connect to the electricity

did the led flash one time? If so

the 

power source is normal; If not

please check if the switch and the 

transformer has power out         

 

Check if the power input of the IC board is normal 

 

Check if the cable connect to the display loose 

 

Change the main board to see if it is normal. 

 

Chang the display

 

 

 

LED not light

 

 

When connect to the electricity

did the led flash one time? If so

the 

power source is normal; If not

please check if the switch and the 

transformer has power out         

 

Check if the power input of the    IC board is normal 

 

Check if the cable connect to the display loose 

 

Change the main board to see if it is normal. 

 

Chang the display

 

 

Some of the LED not 

light

 

 

LED is connected by leds in series first, then connect parallel, so 

please check if the leds is loose 

 

  Use the multimeter to check if the led is bright or not, of not, please 

change the led 

 

check whether current limiting resistor is normal or not   

 

Check constant current IC is normal or not (compared with the normal 

IC)

 

Single color leds 

always bright/not 

bright

 

 

Check the switch of this color is normal or not 

 

Change the IC control board

 

Noted

only professional persons can do as above

 

 

 

 

Summary of Contents for NPQ818
















Reviews: