Model SR585
i
Bariatric Stand-On Scale
Operating and Service Manual
Part No. MAN585
i
-KG_MICROBAN_201006
Page 8 of 22
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
sri@srinstruments.com
Copyright 2020
S
Instruments, Inc.
SYSTEM DESCRIPTION and INTENDED USE
SYSTEM DESCRIPTION
The SR585
i
-KG Bariatric Stand-On Scale employs the latest in microprocessor and load cell
technology to provide accurate and repeatable weight data. Four (4) identically matched transducers
are strategically placed to ensure an accurate representation of the patient’s weight.
The low power microprocessor circuitry allows the SR585
i
-KG to derive its power from six (6)
common “D” cell batteries, which will provide up to 400 hours of weight readings before needing
replacement. This eliminates the need for an external battery charger.
The SR585
i
-KG can be powered by a Medical Grade AC wall power supply, with the “D” cell
batteries providing backup power. Continuous wall power allows the unit to be always on and
ready to take weight readings without the need to make contact with the membrane switch.
The patient’s weight is displayed on a 16-character dot matrix LCD. The weight data may be viewed
in kilograms with a displayed resolution of 0.1 kg.
INTENDED USE
The
SR585
i
-KG
Bariatric
Stand-On
Scale
is
specifically designed for use as a portable patient
weighing system for ambulatory or those that need to
be supported by a chair or walker. Optional equipment
includes a Height Bar, Printer, and AC Power Supply.
Maximum weight capacity must not exceed 454
kilograms gross weight.
MICROBAN ANTIMICROBIAL PROTECTION
Microban® antimicrobial technology has been added to help reduce the growth of bacteria as part
of a medical center's approach to creating a cleaner healthcare environment.
For more information,
visit
https://www.microban.com/sr-scales
STORAGE and TRANSPORTATION
STORAGE
If storing this equipment for periods longer than three (3) months, remove the batteries. To
maintain proper operation of this instrumentation, storage and transport conditions should not vary
outside the following conditions: Relative Humidity 0% to 85%, Ambient Temperature 14°F to
122°F (-10°C to +50°C).
TRANSPORTATION
To transport the SR585
i
-KG Bariatric Stand-On Scale, lower the Height Bar if installed, tip the
scale back and wheel it to a new location. Lower the platform back down to the floor, being
careful not to shock the scale.
WARNING
DO NOT EXCEED
MAXIMUM WEIGHT LIMIT OF
454 KG
