Model SR7010
i
Wall Mount Platform Scale
Operating and Service Manual
Part No. MAN7010
i
_150908
Page 4 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
sri@srinstruments.com
Copyright 2015
S
Instruments, Inc.
ASSEMBLY cont’d
STEP 4:
Position the Wall Hanger so that the wall frame cross member is centered in the Wall
Hanger and the Wall Hanger is pressed against the bottom of the cross member.
STEP 5:
Using the Wall Hanger as a template, mark the location of the four (4) Wall Hanger
holes on the wall.
STEP 6:
Remove the Wall Hanger and drill four (4) pilot holes, no larger than ¼” diameter in the
locations marked. Install the four (4) Self Drilling, Screw Anchors.
STEP 7:
Position the Wall Hanger on the wall frame cross member. Screw the Wall Hanger to
the screw anchors using the four (4) Phillips #8 x 1” Flat Head screws supplied.
REPLACEMENT PARTS and ACCESSORIES
Part #
Description
FRTP211C1
Paper, thermal printer 58mm (15 rolls)
FRMW173K
AC Power Supply
