Model SRV930 Series Medium Capacity Counter Top Scale
Operating and Service Manual - S/N 1132+
Part No.: MANSRV930_141208
Page 8 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
sri@srinstruments.com
Copyright
2014
S
Instruments, Inc.
BASIC SYSTEM OPERATION
TURNING SYSTEM ON
Make sure the scale is free and clear of any obstructions, then press the “
TARE/ON/OFF
” button
to turn the scale on. When scale is ready, “
0.00
” will be displayed.
REWEIGH (NEXT USE)
To reweigh the same or different patient, be sure the tray is free and clear of any objects. Press the
“
TARE/ON/OFF
” button to zero the scale. When “
0.00
” is displayed, the scale is ready for use.
Kg/Lb FUNCTION
Press the “
Kg/Lb
” button to toggle between lb, oz, lb:oz, or kg displayed weight.
The scale will remain in the last mode used unless manually changed. Example: If the last weight
recorded was in kilograms and the scale is shut down, the weight mode will be in kilograms when
the scale is turned back on.
TARE
The tare function is used to subtract any additional items (example: receptacle) from the patient’s
Net weight.
MEMORY
Press the “
MEMORY
” button to store the “last weight” for recall if needed. To view the last
stored weight in memory, press the “
MEMORY
” button again to return to the original value.
NOTE
: “
MEMORY
” button will not store weight if weight is under two pounds (one kilogram).
“
MEMORY
” will hold last stored weight until the memory is replaced with another stored
memory. (The memory will not zero.)
HOLD ARROW INDICATOR
The HOLD
►
arrow at the left bottom of the LCD display will first flash when weighing.
TURN SYSTEM OFF
The SRV930 scale can be programmed to auto-shut down at 120, 180, 240, or 300 seconds.
Pressing the “
TARE/ON/OFF
” button until the scale turns off will conserve on the battery life.
To change the auto shut down time press the “
TARE/ON/OFF
” button to turn the scale “
ON
”.
Press and hold the “
Kg/Lb
” button until the display reads “
UNIT
”. Press the “
Kg/Lb
” button
until the display indicates “
A.OFF
”.
Continue on next page
