Model SRV930KG Series Medium Capacity Counter Top Scale
Operating and Service Manual
Part No.: MANSRV930KG_201102
Page 8 of 14
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
sri@srinstruments.com
Copyright
2020
S
Instruments, Inc.
BASIC SYSTEM OPERATION
TURNING SYSTEM ON
Make sure the scale is free and clear of any obstructions, then press the “
TARE/ON/OFF
” button
to turn the scale on. When scale is ready, “
0.00
” will be displayed.
REWEIGH (NEXT USE)
To reweigh the same or different patient, be sure the tray is free and clear of any objects. Press the
“
TARE/ON/OFF
” button to zero the scale. When “
0.00
” is displayed, the scale is ready for use.
Kg/Lb FUNCTION
Button is disabled on this model.
TARE
The tare function is used to subtract any additional items (example: receptacle) from the patient’s
Net weight.
MEMORY
Press the “
MEMORY
” button to store the “last weight” for recall if needed. To view the last
stored weight in memory, press the “
MEMORY
” button again to return to the original value.
NOTE
: “
MEMORY
” button will not store weight if weight is under one kilogram.
“
MEMORY
” will hold last stored weight until the memory is replaced with another stored
memory. (The memory will not zero.)
HOLD ARROW INDICATOR
The HOLD
►
arrow at the left bottom of the LCD display will first flash when weighing.
TURN SYSTEM OFF
The SRV930KG scale can be programmed to auto-shut down at 120, 180, 240, or 300 seconds.
Pressing the “
TARE/ON/OFF
” button until the scale turns off will conserve on the battery life.
To change the auto shut down time press the “
TARE/ON/OFF
” button to turn the scale “
ON
”.
Press and hold the “
Kg/Lb
” button until the display reads “
UNIT
”. Press the “
Kg/Lb
” button
until the display indicates “
A.OFF
”.
Continued on next page
