Page | 2
INKWV-20130702
Important
Thank you for purchasing our wireless video door
phone. Before carrying out the installation of your
new system, we strongly
advise you read this
manual carefully and completely!
Please charge the batteries for at least 10 hours
before first time use.
Although the wireless video door phone has error
correction capabilities, it can be affected by other
equipment in the area. It is strongly advised to test
the product before choosing your final installation
position. (See also Propagation of radio waves).
Power requirement
The system can be powered by battery or an
electrical power supply, or both together. When
powered by battery and electrical together, the
battery will automatically recharge when it is low.
•
Battery Voltage: DC 3.7V capability:
1400mA/h
•
Electrical supply INPUT 230 Volts AC, OUTPUT
5V, 1000mA.
In the event of a power failure, the communication
can be lost. The electrical network is classified as
hazardous. The only way to power down the
charger is to unplug the power from the electrical
outlet. Ensure that the electrical outlet is always
easily accessible.
Warning
:
1.
Only use the charging base supplied with your Wireless Video Door Phone.
2.
Do not allow the charging contacts or the battery to come into contact with metal objects.
3.
Do not open the handset, outdoor station or charger as you could be exposed to high voltages.
4.
Never short circuit the battery.
5.
Do not expose the battery to extreme heat, fire or water
6.
Always use the cables provided with the product.
The radio signal
Radio frequency or radio waves are used for
wireless communication between outdoor and
indoor stations.
The performance of wireless communication
depends on the environment where it is applied.
Radio coverage quality will be affected by possible
blockage between transmitter and receiver! Think
about walls, concrete, metal (armored doors,
elevator shafts, etc.), plasterboard, wood, etc.
Not only visible obstructions can affect wireless
quality, we get interference from electric or
electromagnetic devices as well! Think about
wireless routers, microwave ovens and TV’setc. It is
important to test the wireless coverage on site
before starting the installation!