SS-16 VoIP-2-GSM USER MANUAL
DOC. NO: SS-16-14 (REV. 02)
Page 5 of 84
Enterprises with existing IP infrastructure will use the SS-16 devices to
terminate
the calls to mobile networks, achieving substantial savings on
outgoing and incoming calls from IP to GSM networks and vice versa.
It can also be used by providers, ensuring low-cost call termination at different
locations throughout the world. VoIP calls originating from anywhere can be
sent via Internet to be
terminated
through SS-16 VOIP-2-GSM devices
located at the corresponding sites. The respective SS-16 VOIP-2-GSM
devices will then directs the calls to the required local GSM network, with the
minimum possible cost.
Flexible Usage
SS-16 VOIP-2-GSM can be used in several ways:
-
with an IP PBX that has SIP subscribers;
-
with hardware SIP telephones,
-
with soft phones, such as the free application SJ Phone.
In order to ensure correct installation/configuration and good operation of the
SS-16 VOIP-2-GSM device, the manufacturer strongly recommends the study
of this manual before attempting operation.
