DIGIVEX Motion - PROFIBUS
21
PVD 3554 GB 01/2004
Permissible cable length for one segment
Transmission speed
Max. cable length for one
segment
9.6 – 187.5 kbauds
1000 m
500 kbauds
400 m
1.5 Mbauds
200 m
3 - 12 Mbauds
100 m
Repeaters can be installed to increase the length of a segment.
Cable installation rules
It is prohibited for the bus cable to be:
• twisted
• stretched
• or compressed
during installation. Moreover, the conditions linked to electromagnetic compatibility must also be
observed during installation.
PROFIBus cable requirements for DIGIVEX Multi Motion (DMM
REFERENCE DMM
REQUIRED LENGTH
DMM06002P
DMM06004P
DMM06008P
0,17 mm between axes
DMM06016P
0,22 mm between axes
DMM06032P
0,30 mm between axes
3.1.3 Bus connector
Use a bus connector such as one of those described in the table below to connect up the
PROFIBUS cable to the communication module.
Recommended PROFIBUS connectors
REFERENCE
AC62001
AC62002
AC62003
Max. transmission speed
12 Mbauds
Terminal resistor
On/Off switch
Cable output
45°
180° (coaxial)
45°
Interfaces
PROFIBUS subscribers
PROFIBUS bus cable
9-pin Sub-D female connector
4 junction terminals for wires up to 1.5 mm²
PROFIBUS cable diameter
8 ± 0.5mm
Please refer to the manual delivered with the connector for connector cable assembly instructions
and wire baring lengths.
