SSS Siedle AHTV 870-0, Product Information

6

Die Türöffner-Funktion i

st fest der 

Schlüsseltaste zugeordnet.

Alle anderen Tasten des Gerätes sind 
frei

 programmierbar und 

können 

doppelt belegt werden. Diese 

Programmierung wird am Server 

vorgenommen.

Z

ubehör für AZTV 870-

…

AZTV 870-… Tischzubehör für 
die Umrüstung von Wandgerät zu

Tischgerät.

Technische Daten

Betriebsspannung: PoE nach 802.3af
Umgebungstemperatur: 
+5 °C bis +40 °C
Abmessungen (mm) B x H x T: 
106 x 278 x 51

Application

Access in-house te

lephone video 

with door release button and 7 
additional buttons with 2-colour 
st

atus LED. All button

s are freely 

programmable. The display s

hows 

the camera imag

e and the graphic 

me

nu interface.

With the functions calling

, speech, 

door release, vision, light, remote 
switching and 

call silencing.

Performance features:

• 

Display 8.8 cm

• Entrance for storey calls

• Exit freely pro

grammable

• Call dif

ferentiation between door 

calls, storey calls and indoor calls
• Switching functions
• Status indications

• Video memory

 function

• Integrat

ed 5-way control button

• Can be used with table-top acces

-

so

ry AZTV 870-… as a table-top 

device

Electrical voltage

Mounting, installation and servicing 
work on electrical devices may only 

be performe

d by a suitably qual

ified 

electrician.

Electrostatic charging

As a result of electrostatic charging, 
direct contact with the circuit board 
can result in destruction of the 

device. Direct contact with 

the circuit 

board must therefore be avoi

ded.

Note

For use only in dry indoor atmos-

pheres.

English

Scope of supply

• 

AHTV 870-… (Base plate and 

housing with circuit board)

• Receiver
• No-tangle cord
• 

Two RJ45 plugs

• 

Operating instructions for the 

end user
• 

This product information

Mounting

1 

Recommended mounting height 

appr. 1.65 m to display height/
viewing height.

2 

Open the device from the back 

by releasing the base plate with the 
locking lever.

3 

Align the base plate centrally rela-

tive

 to the flush mounte

d socket and 

mark th

e fixing holes.

4 

Insert the provided RJ45 plug on 

the adapter circuit board. Fasten 
the base plate directly on the wall 
using 4 screws, paying attention that 
the plate is the right way up (top 
marking). 

5 

Insert the coloured plug of the 

no-tangle cord into the socket at the 
housing. A distinct click is audible 
when the plug is correctly inserted.

6 

Insert the other end of the no-

tangle cord in the receiver until 
the plug clicks audibly into place. 
This connection can no longer be 
detached.

7 

Hook the housing into the base 

plate from above and close by 

exerting

 a slight pressure.

Dismantling

8 

To remove the housing, press 

the lock upwards us

ing a flat blade 

screwdriver. The circuit board and 
receiver remain on the upper part of 
the housing.

Lettering

9 

The lettering panel can be 

inscribed to indicate the button 
functions. The see-through panel 
can be lifted at the side.

A markin

g template is provid

ed in 

the download a

rea of our website.