46
6 Supplementary functions
Controller door release CTÖ 602-…
The controller door release
CTÖ 602-… is used to actuate a
door release from the subdistributor.
This installation is used if the con-
necting wires are not connected in
the housing of the door station for
safety reasons. Connection of the
CTÖ 602-… takes place at junctions
D+/D- of the Siedle door loud-
speaker TLM 612-… or TLE 061-…
For selective actuation of the door
release, one CTÖ 602-… is required
per door loudspeaker.
Specifications
Operating voltage: 12 V AC
Operating current: max. 70 mA
Contact type: n.o. contacts
max. 24 V, 2 A
Switching time: Fixed at 3 sec
Protection system: IP 20
Ambient temperature:
0 °C to +40 °C
Horizontal pitch (HP): 3
Dimensions (mm) W x H x D:
53.5 x 89 x 60
Remarks
Appliance
requirement
AS-Ta-64/1 with CTÖ 602-…
Summary of Contents for AS-Ta-64/1
