17
Configuring the static IP address
In order to operate the Access server
correctly, you must assign the Server
operating system a static IP address.
This means that the Access server
can always be reached under the
same IP address.
A missing static IP address in regular
operation results in faults or possible
prevention of the Access server
being reached.
Remark
Alternatively, you can also reach the
settings using the start menu:
Start -> Control Panel -> View
network status and tasks ->
Change adapter settings ->
Double click on the used network
adapter -> Properties -> Double
click on Internet Protocol Version
4 (TCP/IPv4).
Procedure
1
With the right-hand mouse
button, click on the network icon in
order to open the context menu.
2
Click on
Open Network and
Sharing Center
.
3
Click on
Change adapter set
-
tings
.
4
Double click on the network
adapter you wish to use in order to
open the properties of the network
adapter.
5
Click on
Properties
in order to
display the properties of the network
adapter.
6
Double click on
Internet Protocol
Version 4 (TCP/IPv4)
in order to
change the settings.
7
Click on
Use the following IP
address:
in order to assign a static
IP address to the server operating
system.
8
In the input field
IP address
, indi
-
cate an IP address under which you
wish the server operating system to
be reachable (e.g. 192.168.1.1).
9
In the input field
Subnet mask
,
enter the subnet mask (e.g.
255.255.255.0).
Continued overleaf…
8.
9.
