SSS Siedle DCIP 650-01, Manual

19

Function

Up to 29 PC users (Software Clients) 
of a network can be called from the 
door station. Calling, speech and 
door release via the Software Client 
DCIP SC 600­... . The Software 
Client must be installed on every PC 
which receives calls.
Call functions of the Software Client 
3­tone chime as standard, a dedi­

cated *.wav file can be assigned for 

each call tone.
It is not possible to listen in to an 
existing call from other PC users in 
the network. The door is opened by 
the called PC user using a “virtual 
door release button”, the light 
switching function is actuated using 
a “virtual light button”. The door 
call can be muted with an optical 
display on the monitor.

Supplementary functions

• Additional PC users can be imple

­

mented with an additional line.

• Up to 10 PC users can be called in 

parallel with a call button from the 
door station. Up to 49/45 PC users 
are possible at one IPVS 600­... . 

Reduction to 45 PC users can result 
if 10 or more PC users are config

­

ured as parallel devices.

In-Home bus Video

Single line system

Remarks 
a)

 The TR 603-... (12 V AC, 1.3 A)

can supply 1 door release button 
and max. 24 bus call button modules 
with LED lighting (BTM 650-01, 

­02, ­03 and ­04). With more than 

24 illuminated bus call button 
modules, an additional TR 603-... is 

required. 
Current consumers in the AS 
diagram: 
Door release appr. 600 mA 
Camera heating 100 mA 
LED lighting 

Per bus call button module 25 mA

b)

 Door release contact load in the 

bus video line rectifier BVNG 650-... 

max. 15 V AC, 30 V DC, 2 A. 

• Light contact load in the bus video 
line rectifier max. 15 V AC, 30 V DC, 
2 A.

c)

 Door release 12 V AC, use at least 

20 Ohm (e.g. TÖ 615-...).

f)

 Distance of the BVNG 650-.../ 

SII 650-... to the door station max. 
100 m with J-Y(ST)Y 0.8 mm core 

material. During installation, ensure 
that the door release is laid in a 
separate cable. Supply voltage 

available from SIVS 610-... at the 
terminals bv+/cv- 12 V DC, max. 
300 mA.