SSS Siedle DCIP 650-01, Manual

21

In-Home bus Video

Single­line system with DCA 740­...

Function

Up to 29 PC users (Software Clients) 
of a network can be called from 
the door station. Calling and door 
release via the Software Client  
DCIP SC 600­... .
The Software Client must be 
installed on every PC which receives 
calls. The door call is switched via 
the DCA 740­... to the telephone 
system. A connected telephone can 
accept the door call.
Call functions of the Software Client 
3­tone chime as standard, a dedi­

cated *.wav file can be assigned for 

each call tone.
It is not possible to listen in to an 
existing call from other PC users in 
the network. The door is opened by 
the called PC user using a “virtual 
door release button”, the light 
switching function is actuated using 
a “virtual light button”. The door 
call can be muted with an optical 
display on the monitor.

Supplementary functions

• Additional PC users can be imple

­

mented with an additional line.

• Up to 10 PC users can be called in 

parallel with a call button from the 
door station. Up to 49/45 PC users 
are possible at one IPVS 600­... . 

Reduction to 45 PC users can result 
if 10 or more PC users are config

­

ured as parallel devices.

Remarks 
a)

 The TR 603-... (12 V AC, 1.3 A) 

can supply 1 door release button 
and max. 24 bus call button modules 
with LED lighting (BTM 650-01, -02, 

­03 and ­04). 

With more than 24 illuminated bus 

call button modules, an additional 

TR 603-... is required. Current 

consumers in the AS diagram: 

Door release appr. 600 mA

Camera heating 100 mA

LED lighting 

Per bus call button module 25 mA

b)

 Door release contact load in the 

bus video line rectifier BVNG 650-... 
max. 15 V AC, 30 V DC, 2 A.

• Light contact load in the bus video 
line rectifier max. 15 V AC, 30 V DC, 
2 A.

c)

 Door release 12 V AC, use at least 

20 Ohm (e.g. TÖ 615-...).

d)

 Conductor length bus telephone ­ 

storey call button ERT max. 50 m.

e)

 When using the internal video 

memory module, the bus telephone 

BTCV 850-... must be supplied 

by an additional direct voltage 

(20 - 30 V DC, 350 mA). NG 602-... 
or VNG 602-... can be used for this 

purpose. Connection of the power 

supply to terM/-M.

f)

 Distance of the BVNG 650-.../

SII 650-... to the door station max. 
100 m with J-Y(ST)Y 0.8 mm core 

material. During installation, ensure 
that the door release is laid in a 
separate cable. Supply voltage 

available from SIVS 610-... at the 
terminals bv+/cv- 12 V DC, max. 

300 mA. 

The DCA 740-01 can optionally be 

connected to the PBX extension of 
a telephone system. Active door 
calls can then be routed via the 
telephone. The functions of the 

IP interface still remain possible.