SSS Siedle DCIP 650-01, Manual

23

In-Home bus Video

Multiple line system

Function

Up to 29 PC users (Software Clients) 

in a network can be called per 

SII 650-... . In a multiple-line system, 

several lines are connected. The line 
address must be set the same at 

each BVNG 650-..., SIVS 610-... and
SII 650-... . In each line, a maximum 
of one DCIP 650-... may be used. 

In a multiple­line system with 

2 lines, this means that 60 users 

can be called form a door station. 
Calling and door release via the 

Software Client DCIP SC 600-... . 

The Software Client must be 
installed on every PC which receives 
calls. The door call is switched via 

the DCA 740-... to the telephone 

system. A connected telephone can 
accept the door call.
Call functions of the Software 
Client 3­tone chime as standard, a 
dedicated *.wav file can be assigned 
for each call tone.
It is not possible to listen in to an 
existing call from other PC users in 
the network. The door is opened by 
the called PC user using a “virtual 
door release button”, the light 
switching function is actuated using 
a “virtual light button”. The door 
call can be muted with an optical 
display on the monitor.

Supplementary functions

• Additional PC users can be 

implemented with an additional line.

• Up to 10 PC users can be called in 

parallel with a call button from the 
door station. Up to 49/45 PC users 
are possible at one  

IPVS 600-... . Reduction to 45 PC 

users can result if 10 or more PC 
users are configured as parallel 
devices.

Remarks 
a)

 The TR 603-... (12 V AC, 1.3 A) 

can supply 1 door release button 
and max. 24 bus call button modules 
with LED lighting (BTM 650-01, -02, 

­03 and ­04). 

With more than 24 illuminated bus 

call button modules, an additional 

TR 603-... is required. Current 
consumers in the AS diagram:

Door release appr. 600 mA

Camera heating 100 mA

LED lighting 

Per bus call button module 25 mA

b)

 Door release contact load in the 

bus video line rectifier BVNG 650-... 
max. 15 V AC, 30 V DC, 2 A.

• Light contact load in the bus video 
line rectifier max. 15 V AC, 30 V DC, 
2 A.

c)

 Door release 12 V AC, use at least 

20 Ohm (e.g. TÖ 615-...).

f)

 Distance of the BVNG 650-.../

SII 650-... to the door station max. 
100 m with J-Y(ST)Y 0.8 mm core 

material. During installation, ensure 
that the door release is laid in a 
separate cable. Supply voltage 

available from SIVS 610-... at the 
terminals bv+/cv- 12 V DC, max. 
300 mA.

The DCA 740-01 can optionally be 

connected to the PBX extension of 
a telephone system. Active door 
calls can then be routed via the 
telephone. The functions of the IP 
interface still remain possible. 

g)

 The DCA 740-01 can optionally 

be connected to the PBX extension 
of a telephone system. Active door 
calls can then be routed via the 
telephone. The function of the IP 
interface remains possible. 

h)

 Each SII 650-... must be 

programmed with the bus 

programming software BPS 650-... 

and the programming interface 

PRI 602-... USB.