SSS Siedle Smart Gateway Professional, Commissioning Instructions

11

Information on programming 

In order to use the door intercom 
system, at least one door call must 
be programmed 

in the In-Home bus.

Programming is described in detail 
in the system manual In-Home bus: 

Video.

In addition to the 

basic functions

, 

you can program additional func-
tions using the 

programming soft-

ware

 BPS

 650-… . For connect

ing 

the PC to the 

In

-Home bus: Video

, 

a programming interface 

PRI 602-… USB and a ZBVG 650-… 

plug-in

 card are required.

The Gateway can be integrated 

into th

e In-Home bus in 2 w

ays: 

Programming wit

h the bus program-

min

g software (recommended) or 

manual progr

amming (Teach-In).

Programming with Bus program-
ming 

software BPS 650-…

When integrating the Gateway in 

the In-Home bus using bus program-
ming, a greater functional scope is 
available at 

the Gateway (basic f

unc-

tions and supplem

entary functions).

Manual programming, also called 
“Teach-In” 

When integrating the Gatewa

y in 

the In-Home bus using manual pro-
gramming, only individual functions 
are ava

ilable at the Gateway. When 

carrying out manual programming, 
you can assign only one bus address 
to 

the Smart Gateway, to allow 

either an IP user or an IP group to be 
selectively c

alled. If this is no

t ade-

quate, you must carry out program-
ming using the bus programming 

software. I

f you decide in favour 

of manual programming, the steps 

with

 bus programming sof

tware are 

omitted.

Remarks on the Finder function 

In the bus programming sof

tware 

(BPS), in the 

Siedle app and in the 

bus software in-ho

use telephone, 

the Finder function can be used in 
order to determine the IP address of 

the Gateway.

Using the Finder function, you can 
lo

cate all Gateways ex

isting in the 

networ

k, provided these are located 

in the sam

e network as the com

mis-

sioning PC with b

us programming 

softw

are, the Siedle app or the bus 

software in-house telephone.
Important: A Gateway can 

only 

locate the Finder function in the 
n

etwork if the Gatewa

y and the 

Siedle app

 or bus software in-

house 

telephone are in the same subnet 
(

Class C) of your network (i.e. the 

first

 three blocks of the local IP 

address mu

st be the same – e.g. 

192.168.178.xxx).
If the Gateway is not l

ocated in the 

same s

ubnet, you will need

 to con-

nect your commissioning PC/laptop 

directly to the Gateway to be able to 

c

arry out the configuration.

Important:

The Gateway must be operated in 

the lo

cal network using a 

static IP 

address (n

ot DHCP operation).