18
Procedure:
1
Click on Basic settings > Date /
time.
2
Select your time zone.
3
Click on automatic summer time
setting if your location changes over
between summer and winter time.
4
Select how you wish the time
setting to take place (automatically/
manual
ly). Observe the inf
ormation
on time setting in the commissioning
requirements.
5
Click on Apply to save your set-
tings/changes.
6
You are automatically logged out
of the Gateway.
Check/change the network set-
tings
Procedure:
7
Click on Basic settings > Network.
8
Check the network settings for
corre
ctness. Change the I
P settings
if other IP addresses are required or
necessary.
9
To create a connection with th
e
Internet, the Gateway requires
valid n
etwork information.
If this is
entered incorrectly, no connection
can be establi
shed with the time
server in the Internet, or the Apple
Push
Notification Servic
e for the
Siedle app
cannot be reached.
10
Check the settings you have
carried out for corr
ectness. Click on
Apply to save any changes you have
made.
Setting video memory/door call
In the menu
Basic settings > Vi
deo
memory/Door call,
you can carry
out settings relating to the video
memory an
d door call. Both se
tting
ranges are visually separated by a
frame.
Procedure:
1
Click on Basic settings > Video
memory/door call.
Video memory settings
:
2
Activate the automatic video
memor
y if you wish an ima
ge to
be taken of the person calling after
every door call.
3
Activate the manual video memory
if you
wish users of the S
iedle app
and of the
bus software in-hou
se
telephone to be able to manually
take
additional images.
4
Set the time in seconds after
which you wish an im
age to be
automatically taken after a door call
(standard se
tting: 5 seconds).
Door call option settings:
5
Activate the direct door call if you
wish users of the Si
edle app and of
the
bus software in-hous
e telephone
to be able to call door call stations
directly.
6
Activate the camera observation
if
you wish users of t
he Siedle app
and of
the bus software in
-house
telephone to be able to display a live
picture from the respective accessible
bus/IP camera.
Existing bus cameras can be selected
directly using the Siedle app or the
bus software in-house telephone.
IP cameras can be additionally
integrated
into the bus softwar
e
in-house telephone and the Siedle
app.
Camera observation enables live
streaming of the picture from any
accessible camera.
This requires the bus cameras for the
camera observation function to have
bee
n activated in the Gateway (Basic
settings> Video memory/door call
>Activate cam
era observation) and
all IP cameras are directly integrated
into the bus softwar
e in-house tele-
phone (BSHT: Settings> IP cameras >
Add IP ca
mera).
In the bus so
ftware
in-house telephone, you can select
the individual bus/IP cameras in the
Cameras menu and stream the live
picture.
With the Siedle app, you
can select the bus cameras in the
Cameras m
enu (camera symbol).
7
If you install a storey call button in
your building, this can be connected
directly to the
Gateway.
However, i
t
is only possible to select a user for
the storey call once you have created
an
IP user / IP group.
PAL/NTSC setting
The standard bus camera on the
door supports the PAL colour trans-
mission system.
If an NTSC camera is used on the
door, then the camera mode must
be ch
anged in the Gateway’s basic
settings.
Procedure:
8
Click on Basic settings > Video.
9
Activate NTSC camera mode.
10
Click on the “Apply” button.
Creating IP users
One licence is required per I
P user.
There are 2 user licences for IP users
contained in
the scope of supply.
If
you require additional user licences,
these can be ordered from Siedle at
www.siedle.com/mysiedle
and
import
ed into the Gateway.
For
subsequent login of an IP user at the
Gateway,
the login data issued in
the Gateway wi
ll be required:
Use
r name (e.g. user0001)
Password
IP addre
ss of the Gateway (e.g.
192.168.178.100)
Procedure:
1
Click on Network users > IP users.
2
Click on Create IP user.
3
Select a user type (e.g. Siedl
e
iPhone/iPad app).
4
Complete the information.
5
Issue a password according to the
s
ystem requirements.
6
Select the In-Home bus address
for the IP user (bus address refer-
ence).
As standard,
the Gateway
is assigned one bus address in the
In-Home bus.
(
For each IP user / group wh
ich you
wish to call
separately, an additional
In-Home bus address must be
reser
ved via the Gateway.)
7
Click on Save.
Commissioning
Summary of Contents for Smart Gateway Professional
Page 1: ...SG 650 0 Commissioning instruction Smart Gateway Professional ...
Page 34: ...34 ...
Page 35: ...35 ...