Temporary switchover of the dialling method
e.g. for remote accessing of an answering machine
By switching over the dialling
method, it is possible to enter
information during a call. For
example to initiate a city call, for
remote accessing of your
Creating a public telephone
network call
1 O seconds after dialling the last
public network number, the
length of call display begins to
clock up.
Terminating a public network
connection
The T 611-0 System Telephone
switches automatically back to
the pulse dialling method after
termination of the connection.
18
answering machine or mailbox
etc.
lf your T 611-0 System Tele
phone is already connected to
a multiple-dialling frequency
000
000
000
000
069123456-
0®
00-00-04
TIME
�10
END
network, the explanation
below is of no significance for
you.
Lift the receiver or press the
handsfree button
Enter the code and call number.
Display
Display
Press the F button
Press the
*
button
Using the buttons O - 9, it 1s
possible using the T 611-0 System
Telephone to output the tone
frequency signals required for
control of your external terminals,
e.g. the answering machine you
wish to access.
Replace the receiver or press the
handsfree button
Display
Display of telephone charges
Entering the charge factor
1 nterrogation
Cancelling
The T 611-0 System Telephone is
able to display e1ther the units or
the amount in money terms per
telephone call, also as a running
Entering the charge factor
Entering the charge rate
1 unit = e.g. in Germany DM 0.23
Entering the units
Accessing charges/units
Left-hand display:
accumulated charge
Right-hand display:
charge for the last call
total. This is only possible
provided the charge pulse has
been connected. lf no charges are
displayed, this does not signify a
�/8
00
6
0
000
000
000
000
CODE WORD
fault. Connection of the charge
pulse must be applied for from
your local telecom office.
Lift the receiver or press the
handsfree button
Press the F button 1 x
Press button 6 1 x
Display
Enter the default code setting of
0000 or your own personal code
word.
0.00
0
CHARGE RATE
0_00 Display
®00
or
0®®
8
�10
�/8
00
256.45
0
CHARGE
Press the 0-2-3 buttons 1 x
Entering the units
Press the 1-0-0- buttons 1 x
Press the door release 1 x
Replace the receiver or press the
handsfree button
Lift the receiver or press the
handsfree button
Press the F button 1 x
Press button 3 1 x
0_23 Display
Replace the receiver or press the
handsfree button
19
