9
Microphone Mini DM-05
receivers built-in can be paired separately. When opening
the pairing menu, choose the concerning unit (transmit-
ter/receiver). In units with both transmitters and receiv-
ers, the pairing button controls the transmitter. The code
key is always the same for the transmitter and the re-
ceiver when these are built-in in the same unit. The easi-
est way to get the same code key in the whole Digisystem,
is to generate a new code key from the combined unit; in
that way the built-in receiver gets the same code as the
rest of the system.
Pairing (via menu)
Select
Receive info
on one unit.
Ready to receive pair-
ing info
is shown in the display. Select
New code
on the
other unit; select
Yes
.
Generate new code and send info?
is shown in the display. Select
Yes
(Now both the channel
and the coding information have been sent, and sound
transfer is eavesdrop-secure). To pair another unit into
your coded system, select
Send info
instead on one of
your paired units.
Pairing (via pairing button)
(The only way of pairing units without a display, with the
pairing button)
Two brief presses activate the
Send info
button.
One long press activates the
Receive info
button.
You can also go straight to the
Pairing
menu item via the
pairing button. One brief press opens the
Pairing
menu
on items with a display.
Pairing (Connector DT-10)
The connector cannot send information, only receive
it. To activate the position
Receive info
, the connector
must be in operation (position I or II) and connected to an
operating hearing aid. The selector is then quickly moved
to position 0 and back to the operating position (I or II).
The connector can now receive pairing info. If no info is
