ST A
UDIO
DSP24 ADAT
- 26 -
VIII. Hardware
settings
The
H/W Setting
dialog of the DSP24 ADAT is used to control the basic driver
settings of the audiocard. You call it via
External Links
(
H/W Setting
button or via
the menu). The
H/W Setting
dialog is also used when you open the ASIO control
panel from an ASIO compatible sequencer such as Emagic Logic Audio or
Steinberg Cubase VST.
The upper section displays the current version of the driver that is installed. Also
you can see the current latency that has been selected for the ASIO 2.0 driver.
Below that, you can see the resolution of the converters that are used in your
hardware installation. This will be always
24-bit
on the DSP24 ADAT as the DAC
used for monitoring on the card works with 24-bit resolution.
Clock Settings
The
Clock Settings
tab, controls the samplerate of the card.
Under
Audio Data Handling
you can determine if the card allows you to playback
and record with a bit-depth that is higher than the converter resolution (displayed
above). As the converter resolution on the DSP24 ADAT is 24-bit, it does not
matter in most situations what is selected here. The default setting is
Allow
operation when data exceeds converter resolution
.
