Installing the System
1. If you are installing the iPrism in a rack, attach the brackets from the enclosed rack mounting kit
to the iPrism and mount it in a standard rack.
2. If you are installing the iPrism on a shelf or desktop, place it on the shelf and make sure that all
of the ventilation holes on the side and back of the unit are clear.
3. Connect the power cable. Turn on the power isolation switch. Do not power the system on using
the front power switch at this time.
4. Connect a network cable from the
Internal Ethernet Port
of the iPrism to your internal
network.
5. Leave the
External Ethernet Port
unconnected. (Later in the installation process, this may be
connected to your firewall or Internet connection. See the
iPrism Installation Guide
for
information on how and when to connect this port.)
6. Leave the
Management Ethernet Port
unconnected.
7. Follow the instructions in the
iPrism Installation Guide
for information on how to complete the
installation process and configure your iPrism system.
Page 4
