Element-MF Stove
9
Caution
INSTALLATION IS TO BE PERFORMED BY A QUALIFIED INSTALLER OR
DEALER.
ADHERE TO ALL CLEARANCES SPECIFIED BY THE MANUFACTURER OF THE
VENTING SYSTEM.
ADHERE TO ALL CLEARANCES SPECIFIED IN THE INSTALLATION MANUAL
OF THE ELEMENT-MF STOVE.
THE ELEMENT-MF USES A POSITIVE PRESSURE VENT SYSTEM. DO NOT
INSTALL A FLUE DAMPER IN THE EXHAUST SYSTEM OF UNIT
DO NOT CONNECT THE ELEMENT-MF STOVE TO A CHIMNEY SYSTEM THAT IS
CONNECTED TO ANOTHER APPLIANCE.
DO NOT INSTALL THIS UNIT IN A SLEEPING ROOM
ATTENTION
CONDENSATION:
When planning the installation of your Element-MF
Stove, keep in mind that condensation is detrimental to exhaust systems. Corn,
Wheat, & Rye have higher moisture content than pellets and can be more
susceptible to condensation forming in certain types of installations. Install the
Element-MF with a minimum of the Vent system exposed to the cold
temperatures outside the envelope of the house. Insulate the vent system if in
doubt. Check with the manufacturer of your venting system that they honor the
warranty of their PL Vent with the use of corn.
ATTENTION
BATTERY BACKUP: We strongly recommend using a battery backup system if
the Element-MF is installed using horizontal venting only. This prevents any
smoke from entering your home in the event of a power failure. The battery
back-up system must provide “pure sine wave” power to operate the unit.
Summary of Contents for Element-MF
