GENERAL INFORMATION
SAFETY PRECAUTIONS
SAFETY NOTICE: The stove must be properly installed in order to prevent the possibility
of a house fire! These installation instructions must be strictly observed! Failure to follow
instructions may result in property damage, bodily injury or even death.
The stove’s exhaust system works with negative combustion chamber pressure and a
slightly positive chimney pressure. Therefore, it is imperative that the air intake and
exhaust system be airtight and installed correctly. Do not install a flue damper in the
exhaust vent of this unit.
Do not connect this unit to a chimney flue serving another appliance or to any air distribu-
tion duct or system.
BUILDING PERMIT
Contact the local building officials to obtain a permit and information on any local instal-
lation restrictions and inspection requirements.
DEFINITION OF “STOVE”
The word “stove” as used in this manual is interpreted to mean a wood pellet burning
freestanding stove, insert, or zero-clearance fireplace unless otherwise noted.
SAFETY TESTING
The stove has been independently tested and listed by Warnock Hersey Laboratories in
accordance with the proposed ASTM Standards and the applicable portions of UL 1482
and ULC S627/B366.2, and Oregon Administrative Rules 814-23-901 through 814-23-
909, stating requirements for installation as a stove, heater or hearth insert for masonry,
metal and zero clearance fireplaces and for mobile home installations. The safety listing
label is located inside the right-side access panel.
DISCLAIMER OF WARRANTY
Since Even Temp Company has no control over the installation of a stove, Even Temp
Company grants no warranty, implied or stated, for the installation of a stove and as-
sumes no responsibility for any special, incidental or consequential damages.
1
Summary of Contents for York Insert
Page 11: ...York Insert Dimensions 10 ...
Page 27: ......
