5
-
If the "Stars" icon is lit, go to Step 3.
2.
Press the Start button. The "Stars" icon lights up.
3.
Press the Start button for 3 to 4 seconds until you hear two beeps.
The "Read" icon flashes when the transmitter searches for your device. It will stop flashing but
remains lit while the transmitter reads the device and the progress lights will move left to right.
4.
The "Tower" icon lights up when the transmitter has read your device. You can remove your
wand.
5.
The "Stars" icon lights up when your device check is complete. The "Stars" icon will turn off
after a short time.
Shut Down
To power down the Merlin@home™ transmitter, unplug the power supply from the wall electrical
outlet. If using a telephone, you may leave the phone cord from the transmitter plugged into the
wall or disconnect it. It should not affect your telephone.
Transmitter Reset
Reset your transmitter only if Technical Support (page 6) instructs you to do so.
Transmitter Messages
Errors may result from variations in telephone equipment, information transmission time, or the
quality of the telephone connection. If the transmitter is plugged in and the green power light does
not come on. contact Technical Support (page 6). For more information on transmitter errors and
messages and how to respond to them, see the Merlin@home™ Transmitter Quick Start Guide
provided with your transmitter.
Note
Occasionally the software in your Merlin@home transmitter is automatically updated. If
any action is required on your part, you will be notified.
Software Updates and Your Transmitter
It is important to keep your transmitter powered on and the connectivity accessory plugged in so
that the transmitter can receive occasional automatic software updates. If transmitter connectivity
is not maintained, your transmitter’s software
may not be updated to
the current version and your
transmitter
may
no longer be
able
to transmit or receive information.
Caring for the Transmitter
If necessary, you can clean the outside of the Merlin@home™ transmitter with a cloth dampened
with water. Do not clean the transmitter while a session is in progress. The transmitter is classified
as IPX0 because it is not waterproof. Do not immerse the transmitter in any liquid.
Preventative maintenance, including periodic safety checks, is not required for this device. If there
is a problem with the transmitter, contact Technical Support (page 6) for a replacement.
WARNING
The transmitter does not contain any user-serviceable parts. This product
complies with medical product regulatory standards. In order to maintain that
Summary of Contents for Merlin home EX1100
Page 1: ...Merlin home Transmitter Model EX1100 EX1100W User s Manual ...
Page 4: ......
Page 19: ......
