EN - 14
12. MAINTENANCE TABLE
Intervention
Frequency
Notes
MACHINE
Check all fasteners
Before each use
para. 7.4
Safety checks/check controls
Before each use
para. 6.2
Check the battery charge status
Before each use
*
Recharge the battery
After each use
para. 7.2.2
*
Cleaning the machine and the engine
After each use
para. 7.3
Checking for any damage to the machine. If
necessary, contact the authorised service centre.
After each use
-
* Refer to the battery/battery charger manual.
13. TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
SOLUTION
1.
The machine does not
start when the throttle
control is activated
Battery is not inserted or
is inserted incorrectly
Make sure that the battery is
inserted correctly (para. 7.2.3)
Low battery
Check the battery status and recharge
if necessary (para. 7.2.2)
Faulty throttle control or
damaged blower
Do not use the machine. Immediately
turn off the machine,
remove the battery
and
contact a service centre.
2.
The motor shuts
down whilst working
Battery is not inserted correctly
Make sure that the battery is
inserted correctly (para. 7.2.3)
Low battery
Check the battery status and recharge
if necessary (para. 7.2.2)
3. The rotor rotates, but
the air does not come
out from the blower tube
Blocked or clogged blower tube
Stop the machine,
remove the battery
and remove any obstructions.
4. Excessive noise and/or
vibration is experienced
whilst working
Loose or damaged parts
Turn off the machine
remove the battery and:
–
inspect for damage;
–
check for and tighten any loose parts;
–
have any damaged parts replaced
or repaired with parts having
equivalent specifications.
•
It is advisable to send your machine
once a year to an Authorised Service
Centre for servicing, assistance
and safety device inspection.
11. WARRANTY COVERAGE
The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover damage caused by:
•
failure to become familiar with the
documentation accompanying the machine;
• carelessness;
•
incorrect or forbidden use or assembly;
• use of non-genuine spare parts;
•
use of attachments not supplied or
not approved by the manufacturer.
The warranty does not cover:
•
normal wear and tear of
consumable materials;
•
normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser’s rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
Summary of Contents for AB 500 Li 48
