Hardware description
UM2264
8/55
DocID030868 Rev 1
2
Hardware description
2.1
STEVAL-IDB007V1M1 board overview
The SPBTLE-1S module in the STEVAL-IDB007V1M development kit lets you experiment
with BlueNRG-1 system-on-chip functions. It features:
Bluetooth
®
SMART board based on the BlueNRG-1 Bluetooth low energy system-on-
chip
Associated BlueNRG-1 development kit software package including firmware and
documentation
Up to +5 dBm available output radiated power (by the module integrated antenna)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.3 mA TX at -2 dBm
Bluetooth
®
low energy compliant, supports master, slave and simultaneous master-
and-slave roles
SMA connector for antenna or measuring equipment
3 user LEDs
2 user buttons
3D digital accelerometer and 3D digital gyroscope
MEMS pressure sensor with embedded temperature sensor
Battery holder
JTAG debug connector
USB to serial bridge for providing I/O channel with the BlueNRG-1 device
Jumper for measuring current for BlueNRG-1 only
RoHS compliant
The following figure and table describe physical sections of the board.
Figure 2: STEVAL-IDB007V1M board components