THE FILLING MUST BE CARRIED OUT WITH THE MACHINE ON A FLAT SURFACE. BEFORE
THE OPERATION, IN THE ALLOCATED AREA, THE DOSES OR MIXTURES TO BE POURED
IN THE TANK MUST BE MADE READY.
Before starting the filling cycle, check:
- THAT THE DELIVERY FILTER ARE CLEAN;
- THE EFFICIENCY OF THE DISTRIBUTION DEVICE (HEAD);
- THE CONDITIONS OF THE TANK LEVEL INDICATOR.
- Anti-dust masks don’t offer any protection against toxic vapours.
- Avoid wearing loose clothes that might entangle with moving parts.
15
PREPARATORY OPERATION TO TREATMENT
• The operator must:
a. Wear adequate protective clothing and accessories such as overalls, waterproof suits, gloves,
glasses and masks to shield the operator from contamination by inhalation or contact with the
products
b. With the parameters defined during the preliminary operations, carry out the adjustments of the
sprayer.
c. Prepare the mixtures in a well ventilated area. When in the open, the presence of wind increases
the danger of contamination.
d. Precisely weigh the previously calculated doses of products to be mixed at every filling operation.
e. Avoid handling products close to open flames, embers, incandescent bodies or in the presence of
flammable substances.
f. In order to obtain the correct volume dosage of agro-chemicals and fertiliser mixtures, the fertiliser
must be first diluted.
g. Wash and rinse the just emptied product containers with clean water – collect the washing water
and pour it in the tank before carrying out the filling – place the empty packaging in the specific
container
h. Wash the equipment and tools utilised in the preparation and place them in the chemical products
storage area.
i. Always leave the area assigned to the loading and preparation of the mixtures in such condition as
to avoid any possibility of contamination to persons or animals or of pollution to the environment.
ST102 - 300L/400L/600L/800L/1000L
- Tractor Mounted
