FILLING AND MIXING
FILLING
the tank by collecting the water needed for the
dilution of the phytosanitary products mixture
from an external tank.
EXECUTION:
1. Prepare the water source to use either
external tank, from a well or from a canal /
channel.
2. Reach out the water source into the top
opening as in (A) and fill the water.
3. Close the tank opening with the tanklid as the
process no. 3 successfully takes place.
THE INLET OF THE FILLER PIPING MUST NEVER COME INTO CONTACT WITH THE
ANTIPARASITIC MIXTURE: IT MUST ALWAYS BE KEPT AT A SAFE HEIGHT ABOVE THE TANK
FILLER AND MUST BE EQUIPPED WITH A NON-RETURN VALVE.
MAKE SURE TO WARE THE MOST SUITABLE PERSONAL PROTECTIVE EQUIPMENT (PPE) FOR
SAFETY PURPOSES.
THE PUMP MUST NEVER RUN DRY.
A
12
ST104-300LITER
- Mounted Sprayers