1
Features
•
Common features
–
STM32MP157 Arm
®
-based dual Cortex
®
‑
A7 800 MHz 32 bits + Cortex
®
‑
M4 32 bits MPU in TFBGA361
package
–
–
4-Gbit DDR3L, 16 bits, 533 MHz
–
1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab
–
USB OTG HS
–
Audio codec
–
4 user LEDs
–
2 user and reset push-buttons, 1 wake-up button
–
5 V / 3 A USB Type-C
®
power supply input (not provided)
–
Board connectors:
◦
Ethernet RJ45
◦
4 × USB Host Type-A
◦
USB Type-C
®
DRP
◦
MIPI DSI
SM
◦
HDMI
®
◦
Stereo headset jack including analog microphone input
◦
microSD
™
card
◦
GPIO expansion connector (Raspberry Pi
®
shield capability)
◦
ARDUINO
®
Uno V3 expansion connectors
–
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port
and debug port
–
and full mainline open-source Linux
®
STM32 MPU OpenSTLinux Distribution (such
as
) software and examples
–
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
•
Board-specific features
–
4" TFT 480×800 pixels with LED backlight, MIPI DSI
SM
interface, and capacitive touch panel
–
Wi
‑
Fi
®
802.11b/g/n
–
Bluetooth
®
Low Energy 4.1
Note:
Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2637
Features
UM2637
-
Rev 2
page 2/47
