Low voltage 3-ph brushless motor driver expansion board
Start coding in just a few minutes with X-CUBE-SPN17
8
1
On the X-NUCLEO-IHM17M1
•
Tune R12 potentiometer.
•
JP6 and P5 open
•
JP3 and JP4 closed on “1Sh” position
Driving one 3 phase brushless motor with
X-NUCLEO-IHM17M1 and X-CUBE-SPN17
2
Stack the X-NUCLEO-IHM17M1 on the STM32 Nucleo
board using the ST morpho connector and connect the
3 phase brushless motor (U,V,W) to the J3 connector.
4
Connect the STM32
Nucleo board to the PC
through the USB cable.
On the NUCLEO-F401RE
JP1 off
JP5 (PWR) on UV5 side
JP6 (IDD) on
3
