Getting started X-NUCLEO-S2868A1
17
DocIDxx
5
/
17
2
Getting started
This section describes the hardware requirements for the X-NUCLEO-
S2915A1 evaluation boards.
2.1
Overview
The X-NUCLEO-S2915A1 main features are:
•
Based on S2-LP radio
•
S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for
860 - 940 MHz frequency band
•
Modulation schemes: 2-FSK, 2-GFSK05,2-GFSK1, 4-FSK, 4-GFSK05
•
Air data rate from 0.1 to 500 kbps
•
Ultra-low power consumption: 7 mA RX and 10 mA TX
•
IEEE 802.15.4g hardware packet support with whitening, FEC, CRC
and dual SYNC word detection
•
RX and TX 128 byte FIFO buffers
•
Support to wireless M-Bus
•
Excellent performance of receiver sensitivity (up to -130 dBm)
•
Automatic acknowledgement, retransmission and timeout protocol
engine
•
Compatible with STM32 Nucleo boards
•
Compatible with Arduino UNO R3 connectors
•
Support
SMA antennas
•
BALF-SPI2-01D3 IPD balun for matching network and harmonics
filter
•
Sigfox compatible
•
Sample firmware for P2P communication
•
6LoWPAN compatible thanks to STM32Cube
•
RoHS compliant
The X-NUCLEO-S2915A1 expansion board can be used for the evaluation
of the S2-LP device in multiple applications.
The following demo samples are available for testing:
•
wM-Bus demo
•
Point-to-point communication protocol demo
•
6LoWPAN applications
•
SigFox communication
You can develop other applications for evaluating the devices, such as:
•
SigFox communication
