8
en
5.3 Manual operation
In manual operation, neither the tilt function nor relevelling
are active. In this mode the unit is aligned entirely by hand.
The unit does not level itself.
Place the laser unit in the appropriate working position
(vertical or horizontal). Press the “ON/OFF” button once.
The green LED indicates that the unit is switched on and
the laser beam flashes. The white “TILT” LED flashes.
Press the “man” button to deactivate the tilt function
and automatic relevelling. The white “man” LED lights up
steadily. The laser beam rotates.
The laser plane can be set up by direction-finding or by
taking measurements. The inclinometer (available as an
accessory) can be used to aid setting up the inclination.
Pressing the “man” button again deactivates manual oper-
ation. The unit reverts to mode 6.1 “Automatic operation
with tilt function”.