9
en
6. Functions
Rotation function
The laser beam rotates through 360° around its axis:
• Horizontal
• Vertical
Right angle (90°)
In vertical operation, the point laser and the rotation plane
form a 90° angle. This allows right angles to be created.
Plumb-line function
Transfers a determined point from the floor to the ceiling.
To transfer a plumb line from a floor marking to the ceiling,
the laser unit is aligned exactly with the cross mark with
the 4 marking points (10). The point of intersection of the
cross mark corresponds to the exiting laser plumb line. In
automatic mode a correct result can only be obtained if the
floor surface is level.
