LAX 50 G
6
en
6. Applications
Clamping onto round profiles
Using the clamping side, push the LAX 50 G onto the round
profile (maximum Ø 30 mm / 1
3
/
16
“
) until you detect the
clamping jaws latching into place. Use the clamping lever to
secure the clamping jaws.
Using with the foot
You can use the foot to fix the LAX 50 G in a specific position.
Thanks to the hanging hole and magnets, it is even possible
to attach the foot to construction elements.
The 5/8" tripod socket allows you to mount the unit on
a construction tripod.
Use the 1/4" thread to secure the adapter on the foot, then
insert the LAX 50 G in the adapter. Rotate the unit to ensure
the laser lines are precisely aligned.
The 1/4" tripod socket in the adapter also allows you to
mount the unit on a camera tripod.
KLICK
