15
S
TEP
2
Assemble the roof frame. Use the screws (25) to firmly attach the parts. Make sure that all parts are fixed well
and secured.
Attach the reinforcement braces (3,4) using the screws (25,26) and wing nut (27).
S
TEP
3
Lift up the roof construction on one side. Assemble the poles (5) to the connectors. Put the roof cover (16)
onto the frame and use the long bungees (24) to fasten it. Be sure not to put to much tension on the bungees
in order not to make attaching the other side more difficult.
It is recommended that these, as well as the following steps, be executed when there is little or no
wind.
