Power Over CameraLink SELECTOR / DISTRIBUTOR / REPEATER
This unit works as a digital signal selector, a distributor and a repeater which is
compliant with PoCL(Power over CameraLink) standard. Input terminal is SDR
and output terminal is MDR. Signal from PoCL compatible camera can connect to
standard CameraLink device without conversion cable. When using as a selector,
by switching input of 2 device, image processing board can be reduced by half .
When using as a distributor, distributed and parallel processing available with 2
distribute output and building image processing system.
Control signal(CC1-CC4) and transfer line(SerTFG,SerTC) specified with
CameraLink Base Configuration can select input/output from switch of front panel
or external signal,
Overview
Features
SELECT and
PoCL MODE
(Input Penel)
- Compliant with CameraLink Base configuration (Standard specification of FA digital
camera).
- The unit works as a selector and a distributor, easily switch depend on the system.
- Input/Output system of control signal(CC1- CC4), communication
line(SerTFG,SerTC) is selectable.
- Remarkable compact body that can be placed anywhere.
